Resistor Specifications

Length & Diameter
Type

Resistance

(Ohms)

Average Power @ 40°C

(watts)

Peak* Energy

(joules)

Peak* Voltage**

(volts)

6" x 1"
887AS..DS
1000
50
13,000
30,000


Call Us: (530)823-5111


Drain Tool


50128-G-01

The STB Drain Tool is designed to drain the voltage capacitated lines or other voltage retaining sources after the lines have been de-energized. The lines should be checked with a voltage detector before and after the Drain Tool is used to make sure the voltage has been drained off.


The Drain Tool was not designed for continuous use and should not be left on lines when they are energized. It is recommended that users wear the proper protective insulated gloves while using this unit and when working on or around high voltage.

Manufacturer recommends test and calibration every 12 months.

 


Drain Tool w/Resistor


50128-G-02


  • Sturdy, lightweight and easy to use
  • Approximately 50" in length
  • Customizable ground cable length
  • Resistor attached for extra safety
  • Designed to drain the voltage capacitated lines or other voltage retaining sources after the lines have been de-energized
  • Lines should be checked with a voltage detector after the lines have been de-energized and before and after the drain tool is used to make sure the voltage has been drained off
  • Not designed for continuous use and should not be left on lines when they are energized